|
• Solvent extraction is a treatment technology that uses a solvent to separate or remove hazardous organic contaminants. Solvent extraction can be both an effective and cost effective process for separating hazardous contaminants from non-hazardous materials and concentrating the hazardous materials for further treatment. Flakes nom the preperation section are fed into an extractor with stainless steel belt. The level in hopper is controlled through an ultrosonic level controller, which regulates the speed of the extractor. Miscella is filtered through special wedgewire filters. Distillation comprises of a series of heat exchangers for heat recovery and evaporation of hexane. The oil is finally stripped in a special stripper operating under low vacuum. Series of specially designed condensors in tubes of stainless steel are used for condensing the hexane vapours for recirculation. The vent gases are specially scrubbed with mineral oil before discharge into the atmosphere. The hexane content of the gases leaving the system is well below the lower explosion limits. The solvent wet meal is fed through a vapour tight conveyor into desolventiser toaster equipped with special level controllers. Here the meal is desolventised in a series of stages and subsequently toasted to remove the antinutritional factors. The meal is subsequently dried and cooled for bagging. Arian engineering private limited takes opportunity to introduce themselves as manufacturers and providers of different range of cost effective solutions in the field of edible oils, proteins and food products..
Product Specification :
• .
• N/A
224, aakansha, plot no. 2, press complex zone - i, m. P. Nagar,,
Bhopal-462 011,Madhya pradesh
Tel: 91-755-4274796
Fax: 91-755-2578835
Send : On-Line Trade Inquiry
|
Click here for enlarge photo
|
