|
• Must when it is required to keep the fixture workpiece area free of straps and clamping components and for unrestricted workpiece loading/ unloading. Horizontal swing clamps are push-type clamps that swing 90 horizontaally and come down and clamp in case of vertical swing clamps the swing of the clamps come down and clamp and when the piston moves down the clamps move up and declamp. Two verieties of horizontal swing clamps are available, viz one type is with 10 mm stroke in which zero stoke during swing and 10 mm vertical movement after swing for clamping. The second variety is 30 mm stroke in which 20 mm stroke during swing and 10 mm vertical movements after swing for clamping. Clamping force from 5 to 38 kn is offered. A wide range of mounting feasibilit, like block-type design, threaded body, bottom and top flange to enable easy assemble/disassemble of cylinders to fixture body, different swing angles like 0 to 180 degrees, etc, are also offered. .
Product Specification :
• .
• N/A
162/1, g.D.House, bendrenagar, subrammnyapura road, banashankari 2nd stage,
,
Bangalore-560 070,Karnataka
Tel: 91-080-2666 8822
Fax: 91-080-2666 9783
Send : On-Line Trade Inquiry
|
Click here for enlarge photo
|
