|
• Stallion engineering systems manufactures rubber conveyor belts. These belts are designed and proffered conforming to indian standard is 1891 (part i) 1994. Its specifications area s follows; standard range of belt width - 400 to 2400 mm; fabrics - the belts are offered with cotton, nylon and ep fabrics in 2 to 8 plies; belt edges - belt edges can be given in both cut and sealed (moulded) edges; cover grades - m-24 - for heavy, sharp abrasive materials as per is 1891 (part - i) 1994; heat resistant hr (t1) - recommended for carrying hot coarse material up to 125°c and hot fine materials up to 100°c, as per is 1891 (part-ii) 1993; super heat resistant shr (t2) - a specially compounded grade for carrying extremely hot materials with temperature up to 180°c for fines and 200°c for coarse. This grade also conforms to is 1891 (part-ii) 1993. This grade of belting may be used for higher temperatures but will result in reduction in belt life; oil resistant - special oil resistant compounds are used to give the best possible resistance to fat and oil. This grade conforms to is 1891 (part-iii) 1993; hygienic grade - the white rubber cover is compounded to be non-toxic and odourless and is used for handling sugar, pharmaceuticals and food products conforming to is 1891 (part-iv) 1988; fire resistant (fr) - specially designed for use in coal and mines where fire-hazards are likely to occur. These belts conform to csa-can-m422/m87 din-22103. The company also manufactures cleated belts, skirt board rubber, rubber sheets, impact rubber rings and bucker up strip (buffer channel)..
Product Specification :
• .
• N/A
45/56 podar chambers s a brelvi road, fort,
Mumbai-400023,
Tel: 022-2663262, 2663202.
Fax: 91-22-2661545.
Send : On-Line Trade Inquiry
|
Click here for enlarge photo
|
