|
• Abbott air systems presents centrifugal blowers manufactured as per amca 210 standard. It comes in a healthy casing and is made out of suitable sections of mild steel/stainless steel. The sheets are sized with nibbling machine transient deformation and are thereafter welded with fixtures and dc welding sets to evade distortions.
for maximum efficience the casing is aero dynamically designed. Being the heart of the blower, the impeller/rotor is accurately designed for required combination of air quantity and static pressure and is machined after careful fabrication. The hub of cast iron is machined within close tolerance while the impeller is made in one piece and is securely keyed in the shaft. The rotor along with other un-machined rotating part is statically and dynamically balanced so as to zero every vibration. And the shaft is machined out of en- b forging or suitable material and has close tolerance at the rotor, coupling, pulley and bearing diameters. The size of shaft is arrived at on basis of proper stress that does not exceed 30 per cent of its static limit in tension or 18 per cent of tensile strength. The shaft is catered with at least 20 per cent higher speed than the normal operating speed. The bearings are normally ball or roller bearings, suitable to take up necessary radial load as well as the axial thrust. Sleeve bearings can be provided in special cases as well..
Product Specification :
• .
• N/A
Plot no: 28, sector - 27a, mathura rd,,
Faridabad-121 002,Haryana
Tel: 91-129-25779440, 5778572
Fax: 91-129-25271573, 74
Send : On-Line Trade Inquiry
|
Click here for enlarge photo
|
