|
• Clamping module type nsmd 2 is applied for the actuation of hydraulic clamping devices, such as draw-in collects (hollow or massive) at cnc-lathes. Type nsmd 2 is a manifold mounting valve featuring a hole pattern confirming din 24340-a6. Their purchase are clamping/releasing of the clamping cylinder, pressure reduction, and electric pressure monitoring (if requested) are housed in a joint body. The adjustment of the clamping pressure and the pressure switch work through an adjustment device either manually, with tools or electro-proportionally. This feature is provided for consumer port a only or both a and b. A safety circuit monitors the mode of the 4/32 - or 4/2 - way directional valve. The accuracy for valves are usually with spring return but the 4/2-way is also perioded with detent. Additional functions, e.G., throttling in the spools end position, rapid traverse and creeping for one or both consumer sides are available. All these valves are manufactured as per requirement a specifications. .
Product Specification :
• .
• N/A
Flat no: 18, 1st floor, 239, s n s chambers, sankey road sadashiv nagar,,
Bangalore-560 080,Karnataka
Tel: 080-3610594
Fax: 080-3618148
Send : On-Line Trade Inquiry
|
Click here for enlarge photo
|
