|
• The eraser company inc presents their latest product, the wm series of wire and cable measuring meters.The wm units will correctly measure to length various types of wires, tubing,cables, flat materials, cord etc, used in the electrical assembly industry. It is available in both inches and metric versions, with different types of measuring rollers for different applications. The wmi measures it, feet and inches to 9,999"11", and is accesable with standard knurled rollers, urethane rollers to decrease marking of the material jacket, or grit rollers to subdue slippage and increase accuracy. All wm meters have a digital counter to record the amount of material measured, which is easily resettable with a one-touch lever. All meters will measure round material up to 2" (50.8 mm) in diameter or flat material up to 2" (50.8 mm) wide with an accuracy of ±0.5% dependent on material and feed. To measure material, adjust the material input guides for the material size, depress the material release lever, and feed the material between the spring loaded measuring wheels. Pull the material through until the wanted amount has been measured, then cut. The wm meters may be mounted on optional bench or floor stands, and may be used in conjunction with eraser bench dereelers and coilers to form a complete cutting, measuring and reeling combination..
Product Specification :
• .
• N/A
Po box 4961/123oliva drive ,
Syracuse-13221,New york
Tel: 315-454323
Fax: 315-4543090
Send : On-Line Trade Inquiry
|
Click here for enlarge photo
|
