|
• Hydrocyclone clarification is a gravity style clarification. With no moving parts in its continuous operating centrifuge. The clarification starts when the dirty liquid is pumped at a pressure of 2 kgs/cm2 into the head. The head accepts the dirty liquid to start rotation as it enters the helical axial distributor vane. That throws the dirty liquid into the cell in a narrow thin band. This action decreases the intersecting angle between the incoming dirty liquid and spinning body of the dirty liquid that decreases unwanted turbulence and aids to ensure maximum clarification by minimum energy losses. As the dirty enters downward through the helical distributor vane, a free primary vortex creates the outer wall of the carefully designed cell and accelerates downwards. By this high cyclonic action the solid particles gathered near the linner wall of the cell and are carried downwards discharged, due to and orifice opening a differential pressure creates between the inlet and outlet. This opening allows air to enter the cell creating a secondary rising low-pressure vortex. Clean fluid rises through the centre opening of the distributor vane, and discharged out through the outlet of the head. As a general rule soluble oil and water mixture consisting steel and abrasive particles are clarified to a standard or 10-20 microns. Heavier are clarified up to 5 microns. .
Product Specification :
• .
• N/A
Rz-480d/13a tughlakabad extension,,
New delhi-110 019,Delhi
Tel: 011-26097838
Fax: 011-26097838
Send : On-Line Trade Inquiry
|
Click here for enlarge photo
|
